Parts-Middleby       Parts-Lincoln     Parts-Blodgett     XLT/Misc

Adapter Plate. Allows for CTI Speed control to replace Dart drives

CTI Speed Control Adapter plate. Adapts the CTI digital Speed Control to Blodgett, Dart and XLT Ovens

• Adapts our part# CTI-M-DigSpd to ovens using Dart Micro drive control
• Brushed stainless steel. Dimensions: 4.25" x 2.25"
• Allows CTI digital speed to be used in place of the Blodgett digital time display
• Converts Blodgett ovens to our speed control (feedback style control) for $15.
• Purchase the digital speed control and mounting plate for $265
• We also have a non feedback system for use with the existing time display.

Origin USA (Made in USA)

Price: $19

Our Part Number : CTI-B-DigSpd-Plate or CTI-B-AP

Replacement Part for: Blodgett #:
20287,
11501

CTI Solenoid Valve Replacement for Many Blodgett Conveyor Ovens

• Replaces OEM MFG part # H91DA-7
• 1/2" Nat - LP PSI input/output
• 120V 60HZ AC
• Electrical - 1/4" Terminal
• No bypass openings

*Warning: Never use a solenoid valve that does not match the OEM part number of the solenoid in your oven (without first consulting the manufacture). There are real safety issues with using the wrong solenoid in your oven. Sales will be limited to qualified service companies.

Price: call

Our Part Number : CTI-B-SV

Replacement Part for Blodgett#:
M5348,
20325,
M5495,
g96hga-19,
G96HGA-25

LP Kit: Y71GF-4

BAso Dual Operator Combination Gas Valve Replacement for Blodgett conveyor ovens.

• Replaces OEM MFG part # G96HGA-19, G96HGA-25
• Natural Gas (Not for LP)
• LP Kit $10
• 1/2" input/output
• 25V 60HZ AC
• 1/4" electrical terminal

Price: call

Our Part Number : CTI-B-GV

Our replacement part for ®Blodgett# :
M2378,
M10099
Kit - 3127,
BLOM3127,
STRM3127,
42810-0118,
4Y0FEPM-05
24YOFEPM-05

CTI Gear Motor for ®Blodgett Conveyor Ovens: 3270 & 3870, MG3270,MG32, MG

Replacement for most Blodgett conveyor ovens.

Replaces ®MiddlebyM2378, M10099, 42810-0118

• Brushed motor
• 600:1 gear ratio
• Replacement for original equipment motor
• Use with original equipment speed board
• Includes rear output accessory shaft for speed sensor

Origin USA (Made in the USA )

Price: $310

Our Part Number : CTI-B-GM3

---------------------------------------------------------------

Replace Brushless motor and control with Brushed motor and control

Gear motor and speed control kit for 3270 ovens $427

Our Part Number : CTI-B-SpdKit - Call for details

Replacement Part for Blodgett#:
M3149

CTI Temperature Controller for Blodgett Conveyor Oven

US manufacture assembled in Mexico

Functions: Heat On /Off, Cool-down and Hi Limit

We were using the original control manufacture (original control) for several years but we were disappointed with the life of the controller, when used in the Blodgett ovens. We have been using the Honeywell oven temperature controller over the past 5 years.

Price: Call

Our Part Number : CTI-B-T1

Replacement Part for Blodgett computers. ®Blodgett #:
M10049

Matrix Keypad for ®Blodgett Computer Module

Lexan and membrane for Single belt ovens.

Includes: decal, built-in membrane switches and cable.

A bad matrix is the most common computer problem.

(1 Year Warranty

Origin USA (Made in USA)

Qty in stock: 0   Order 50@ $39 each 

Our Part Number : CTI-B-KEYPAD

Replacement Part for ®Blodgett #:
M7427,
M3354

Thermistor (RTD) Probe for ®Blodgett Ovens

• Replaces Blodgett 500 ohm RTD probe
• 6 " probe - Measured from plate to probe tip
• This probe is used in ovens with remote computers (see computer above)

Origin USA (Made in USA)

Price: $40

Our Part Number : CTI-B-RTD , CTI-B-TH-500

Replacement Part for: ®Blodgett #:
1142

Main Blower developed by Cybernetics for ®Blodgett MG32 & made in USA

• 1/4 HP
• 1140 RPM
• 208-230VAC
• 60 HZ
• Extended Insulation Temperature
• Made in USA - We will verify origin with signed statement

Price: Call

Our Part Number : CTI-B-MBQ44

Replacement Part for: ®Blodgett #:
M1209

MG32 Blower wheel

Our own American made Main Blower Wheel for ®Blodgett MG32 &

• 10" diameter
• Balanced at 1140 RPM
• Stainless steel plate, ring and independent blades - Not stamped tin
• Cast hub - machined / turned 
• Made in USA

Price: Call

Our Part Number : CTI-B-BW-MG

Our Replacement Part for: ®Blodgett #:
M1054

Blodgett convection DFG-100,
DFG-200
20348,

Garland,

Older PS350 ovens with Midco Burner
Older Lincoln 1000 ovens

Cross Replacement for Johnson Control G770 MGA-2 Ignition Module used by ®Blodgett

• Baso cross referenced replacement for G770MGA-2
• Designed / manufactured by the same company that builds the Baso gas valves (used in most of the Blodgett ovens).
• Intermittent Pilot Ignition
• 1 year warranty
• For use with flame sensor probe (See below)
• Prepurge: None, Trial: 50 Sec, Retry: None
• 24VAC 50/60Hz
• NEC Class 2
• ANSI Z21.20, SA, CSA-C22.2
• Also used in DFG-100,200 Ovens

Download basic wiring instruction: CTI-B-IM.pdf

Origin USA (Made in USA)

Price:: Call

Our Part Number : CTI-B-IM

Replacement for:
M0415,

BL18256

Probe flame sensing
Y75A

MG32,
MT3870,
MG3270

Lincoln 369075

Probe Flame Sensor for Ignition Module above

2 pieces per package (price per piece)

Origin USA (Made in USA)

Download installation instructions: Y75 Flame Sense Instructions pdf

Our Part Number : CTI-B-FS

Price: call ( Minimum order required) Specify straight (Lincoln) or right angle (Blodgett) connector

Replacement Pilot Burners#:
J987DDW,
M272,
M6398,
R4551

Lincoln: 369076,
4070534 MG-32 2726 with flame sense above

Pilot Igniter for some ®Blodgett and older Lincoln Ovens

Use with Flame sensor above

Connector :  1/4" quick connect (mates with male 1/4" spade on ignition module)

Origin USA (Made in USA)

Price: $45

Our Part Number : CTI-B-PI

Replacement for #:
BLTM1R0545

Control Panel Switch Assembly for Blodgett Conveyor Ovens

This is the clamping type. There is no nut to come loose.

Includes control knob, mounting block and one 10Amp N/C switch (red).

Note: Also Available for Middleby ovens using N/O switch (green).

Our Part Number : CTI-B-SWSEL

Price: $10.50